Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1.
Foldable and adjustable headband
2.
Power switch: slide up to turn it on/down to turn it off.
3.
Multifunction button (MBF):
•
Press it to start and pause music playback. When using the phone feature,
press this button to answer, ignore or end a call.
•
Press and hold this button to switch modes. The available modes are:
3.5mm, SD card and Bluetooth.
4.
>>/V+: press this button once to select the next track. Press and hold to
increase the volume of the unit.
5.
<</V-: press this button once to select the previous track. Press and hold
to lower the volume of the unit.
6.
Charging socket: insert the mini-USB plug here.
7.
3.5mm jack: for wired playback.
8.
Built-in microphone: picks up your voice.
9.
Micro-SD card slot: insert the micro-SD card here.
10.
LED status indicators:
•
Solid red: indicates the headset is charging when the device is off.
•
Alternating green and blue LED: indicates headset has entered into the
pairing mode and is ready to be detected for the first time.
•
Blinking blue and green simultaneously: indicates the battery is running
out of power.
Blinking green slowly: indicates the headset has connected to the
•
Bluetooth device.
•
Blinking blue slowly: indicates that the micro-SD card has been detected.
Solid blue: indicates that the 3.5mm connection has been detected.
•
4
III- Basic operation
Charge your headset
•
Plug the supplied USB cable into the USB port of your computer or to a 5V
USB adapter to charge the battery. The headset must be turned off while
charging.
•
Make sure that your KHS-630 headset is fully charged before using it for the
first time.
•
The headset battery has to be initially charged for at least for 4 hours.
Thereafter, the battery will take from 2 to 3 hours to recharge.
•
While charging, the LED will be solid red. When the battery has reached full
capacity, the red LED will turn off.
Turning your headset on and off
1.
Slide the power switch up to turn the headset on.
2.
Slide the power switch down to turn off the device.
Note: during power on, if the 3.5mm connection is detected, then it becomes the
primary mode for the headset.
5
Tabla de contenido
