Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2
STAGE 2: FENCE PANEL INSTALLATION
STEP 2:
INSTALLING FENCE PANELS
IMPORTANT
Fence panels should be positioned on the
outside of the tension wire.
• Unfold one section of fence panel (8´). Attach panel to all three
panel-to-post brackets .
• Lift the fence panel section up into the rail. Insert a panel-to-
rail clip inside the rail connector cup. Make sure the top wire is
seated in the lip of the clip. Lock into place using supplied tool.
(Fig . 15)
TIP
If fence panel sections don't align, tap panel-to-rail clips
gently until fence panel sections touch each other.
• Repeat this process for each 8´ section, positioning a clip in the
center of each 2´ panel (Fig. 16). Connect two panels together
by using three panel clips.
• Continue installing in 8´ sections until reaching the end of the
fence line.
• Hook the terminating panel section to the three panel-to-post
brackets on the terminating post and pull toward the previous
panel section. If the terminating panel is not an even 2´ you
will need to cut the panel at the closest vertical wire using wire
cutters. Flip panel so short panel connects to three post-to-
panel clips. Connect the two panel sections with three panel
clips. Secure the terminating fence panel to top rail by using
panel-to-rail clips . (Fig . 17)
• Fasten fence panel to each line post with panel-to-post clips
using self-tapping screws. (Fig. 18)
• Fasten top rail to each line posts using self tapping screws
inserted from the curved side.
• Attach tension wire to fence panels with panel-to-wire clip using
adjustable pliers. Attach one clip every 2´.
Fig . 17 Terminating Panel Installation
Red fence panel represents the terminating panel.
Overlap the terminating panel to the
Flip panel so short panel connects to
last full 8´ section .
three post-to-panel clips.
Cut
Panel Clips
PAGE 8
Fig . 15 Fence Panel Installation
Panel-to-Rail Clip Installation
Pull Down
Pull Down
Pull Down
Insert
Insert
Insert
Rail Connector
Panel-to-Rail Clip
Top Rail
(Cutaway View)
Panel-to-Post
Bracket
Wire
2-ft x 4-ft
Fence Panel
Fig . 16 Locations of Panel-to-Rail Clips and
Panel Clips
Near center of each mesh panel
1
Inside of each rail connector cup
2
3
In both ends of each sleeve
Panel-to-Rail Clip
2
1
1
1
Panel-to-Rail Clip
3
3
Unlocked
Unlocked
Pull Down
Pull Down
to Lock
to Lock
Locked
Locked
2-ft x 4-ft
2-ft x 4-ft
Fence Panel
Fence Panel
Fig . 18 Fence Panel Installation
End Panel Connection
Line Post
Cut One Panel Short
Re-Connect with
Panel Clips or Hog Rings
Self-Tapping Screw
Panel-to-Post Clip
End Panel Connection
End Panel Connection
Cut One Panel Short
Re-Connect with
Panel Clips or Hog Rings
Cut One Panel Short
Re-Connect with
Panel Clips or Hog Rings
YARDGARD SELECT
- FENCE FRAMEWORK INSTALLATION INSTRUCTIONS
™
3
STAGE 3: GATE INSTALLATION
Locked
Locked
Locked
Panel-to-Rail Clip
Unlocked
Pull Down
to Lock
Locked
STAGE 3: PARTS LIST
AUTO CLOSE GATE
1
2
* Decorative fence medallion sold separately at homedepot.com
YARDGARD SELECT
- FENCE FRAMEWORK INSTALLATION INSTRUCTIONS
™
TOOLS AND MATERIALS
• Tape Measure
• Adjustable Wrench
• Cordless Drill
• 1/4˝ Nut Driver
AUTO CLOSE GATE (1000-034-737)
N
4' Gate
O
Gate Latch
P
Self-Closing Gate Hinges
Q
PVC Post Protector
Self-Tapping Screws
OPTIONAL (AVAILABLE ON HOMEDEPOT.COM)
Decorative fence
R
medallion*
Decorative fence
medallion*
PAGE 9
QTY.
1
1
1
1
5
QTY.
4
1
Tabla de contenido
