Active Cooling System - Philips HP8360/00 Manual Del Usuario

EnglisH
10
7 Use a comb to divide the hair into sections. Do not put too much
hair in one section.
Note: It is better to section off the crown area and to straighten the hair
underneath first. Then straighten the top area.
8 Push the locking button to unlock the straightening plates if they
are locked.
 Take a section that is not wider than 5cm. Place it between the
straightening plates and press the handles of the appliance firmly
together.
Note: Make sure that the active cooling outlet grille always points towards the
hair roots while straightening (Fig. 8).
10 Slide the straightener down the length of the hair in 5 seconds,
from root to hair end, without stopping to prevent
overheating (Fig. 8).
11 Repeat this process after 20 seconds until you have achieved the
desired look.
Tip: If you want to create flicks, straighten the lock and turn the
straightener a half-circle inwards (or outwards) when you get to the end of
the lock. Hold the straightener for 2 to 3 seconds and then release the lock.

active cooling system

The appliance is equipped with an active cooling system that directs a
cool airflow at your hair immediately after it has passed the straightening
plates, which prevents damage to your hair.
The active cooling system is automatically activated when the appliance is
switched on.
Note: The appliance produces a sound when the active cooling system is
activated. It continues to produce varying sounds as long as the active cooling
system is on. This is normal and does not affect the performance of the
cooling system.
- To switch off the active cooling system, press and hold the active
cooling button until the active cooling light goes out (Fig. 9).