Style selections SSR3472CLSV Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS
6. Place return panel bracket (XX) into top right
pre-drilled holes on return panel (L). Install wall
bracket (UU) on inside of return panel using 3/4
in. screws (YY).
Hardware Used
UU Wall Bracket
Panel Bracket
XX
YY 3/4 in. Screw
7. Install top rail (F) to fixed panel (C) by inserting
screw guides (EE) into both pre-drilled holes.
Install track screws (FF) into each hole connect-
ing the top rail (F) to fixed panel (C). Install roller
bumper (KK) on top of rail (F). Hand tighten
bumper (KK) with hex key (PP). Place brack-
et cover (VV) over bracket (UU). Hand tighten
bracket cover (VV) into place using hex key (II)
on both top and bottom.
Hardware Used
FF Track Screw
Roller Bumper
KK
PP Hex Key
Please return to the instruction manual for the frameless door. Begin following the
instructions starting with Step 6 in the Assembly Instructions section in order to complete
assembly.
6
x 1
x 1
XX
x 2
7
FF
PP
x 2
x 1
x 1
YY
UU
KK
PP
EE
UU
VV
L
F
C