Technical Data; Commissioning - Cross Tools TRAVELBOX 500+ Instrucciones Para El Manejo

Translation of the original operating instructions

4. Technical data

Model
Battery technology
Battery capacity
Continuous output P
Maximum output P
max
Degree of protection
Charge input (normal charge)
Charge input (fast charge)
Nominal voltage (AC) U
Frequency F
nom
Nominal current (AC) I
Nominal voltage (DC) U
Nominal current (DC) I
Universal power socket (KFZ-DC)
USB-C / USB 2.0 / USB 3.0
Response time emergency power supply ≤ 5 ms
Quantity and type of sockets
Ambient temperature
Device dimensions: W x H x L
Weight (net)
Item number
The following safety devices are integrated in the device:
Overload protection
Short circuit protection (reverse polarity protection)
Overheating protection (automatic cooling)
Note on the operation of 12 V consumers:
The output voltage at the 12 V outputs depends on the state of charge of the TRAV-
ELBOX and varies between 12.3 V and 9.4 V. If a stabilised 12 V voltage is required
for the operation of your 12 V consumer (e.g. for a compressor cooler), we recom-
mend using our DC stabiliser (Art.No. 68052).

5. Commissioning

5.1 Before initial commissioning
1. Open the rear cover.
2. Fully charge the device before using it for the first time using one of the charging
cables (I, II, III). To do so, insert the charging plug into the charging socket and
connect it to the power source using the corresponding cable.
nom
nom
nom
nom
nom
TRAVELBOX 500+
Lithium-ion
555 Wh
500 watt
700 watt (3 sec.)
IP23
12-30 V DC / max 6 A
12.8 V DC / max 14 A
230 V
50 Hz (sine wave)
2.3 A
9-12 V / 9-12 V / 9 V /
15 A / 8 A / 2 A / 2,4 A / 3 A
180 watt (max.)
18 watt / 12 watt (max. 36 watt) / 18 watt
2*230V / 1*USB-C / 3*USB 2.0 / 1*USB 3.0 /
3*12V / 1*12V universal power socket (KFZ)
-15 °C - + 60 °C
290 x 155 x 190 mm
~ 6 kg
68053
5
5 V / 5 V
15