Craftsman 14926 Manual Del Operador página 5

process:
• Insert the Drawer Slides into the workbench
Slides and push all of the way to the back.
• Pull the drawer open until it stops to ensure
proper assembly.
• Repeat for the rest of the drawers.
Figure 5
• Square the unit and adjust for optimum
drawer performance.
• Remove enough drawers to reach all fasteners.
(See drawer removal and installation instructions.)
• wrench tighten all fasteners.
• Reinstall drawers. (See drawer removal and
installation instructions.)
Recommended Drawer configuration
Lever Style - Lift or lower (depending
on the slide) the release lever on both
sides, (this allows the slides to ride
over the stops.) Pull out to remove.
Tab Style - Depress the release
tabs on both sides, (this allows the
slides to ride over the stops.)
Pull out to remove.
• To reinstall, carefully align the slides and slowly push
the drawer into the unit until the drawer stops.
c
Leveling foot adjustment
• Adjust leveling foot to desired position with flat head
D
screwdriver or 7/16" open end wrench as shown.
E
5
operation
Release