Pnp/Pci Configurations; Pc Health Status - LanParty NFII ULTRA Manual Del Usuario

1.6.7

PnP/PCI Configurations

Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
* PCI IRQ Assignment *
Slot 1,5
Slot 2
Slot 3
Onboard USB/Slot 4
↑↓→← Move
Enter:Select
F5:Previous Values
The settings on the screen are for reference only. Your version may not be iden-
tical to this one.

1.6.8 PC Health Status

Show PC Health When POST
Current System Temp.
Current CPU Temperature
Current CPU FAN Speed
Current Chassis FAN Speed
+ 3.3V
+ 5 V
+12 V
-12 V
VBAT(V)
5VSB(V)
Shutdown Temperature
↑↓→← Move
Enter:Select
F5:Previous Values
The settings on the screen are for reference only. Your version may not be iden-
tical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Disabled
Auto(ESCD)
Press Enter
Disabled
Auto
Auto
Auto
Auto
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Enabled
27C/80F
37C/98F
4500 RPM
3800 RPM
3.35 V
4.90 V
11.85 V
-11.85 V
3.24 V
5.37 V
Disabled
+/-/PU/PD:Value
F10:Save
F6:Fail-Safe Defaults
Quick Setup Guide
Item Help
Menu Level
Default is Disabled.
Select Enabled to reset
Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot.
ESC:Exit F1:General Help
F7:Optimized Defaults
Item Help
Menu Level
ESC:Exit F1:General Help
F7:Optimized Defaults
1
29