Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INTENDED USE:
This device is intended for the dehumidification of small, closed rooms. Your dehumidifier
operates according to the condensation principle. A fan inside the device blow air over a
chiller, this causes the humidity contained in the air to condense and drip into the
condensation tank. Then the chilled air exits the device.
DIRECTIONS FOR USE
BEFORE OPERATING THE DEHUMIDIFIER
1. Select a firm, level and flat location for the dehumidifier
CAUTION: For proper air flow, locate the unit at least 1 foot from any wall or furniture.
2. Make sure the vents on the back of the product free of dirt and are not blocked.
3. Connect the power cord to the dehumidifier then plug the power cord into a 120V AC outlet.
IMPORTANT:
Your device is fitted with an interlock and will only work properly if the condensation
tank is inserted correctly.
TIP
Best results will be obtained when the windows and doors are closed in the room
where the dehumidifier is being used.
IMPORTANT:
When moving the dehumidifier, always lift unit by the carrying handle located on the back.
OPERATING THE DEHUMIDIFIER
1. Turn the unit power ON.
2. The green power-on light shows that the device is operating.
3. To switch off the device, press the ON/OFF switch.
EMPTYING THE CONDENSATION TANK:
The green power-on light will turn to red when the condensation tank is full.
1. Turn off the device and disconnect from the power supply.
2. Remove and empty the condensation tank.
3. Replace the tank and plug it back in.
NOTE:
To prevent the water tank from becoming accidentally dislodged, once fitted into the housing,
it is secured to prevent any possible movement. When removing the tank, grip the two hand
holds provided and then pull the tank away from the body to release it from the housing.
In this way you reduce the amount of force necessary to overcome the locking device and
then you can remove the water tank in one motion.
E-4
MAINTENANCE & CLEANING
IMPORTANT:
Always turn off then disconnect the power supply when not in use or before cleaning or storing.
Allow the device to cool down to room temperature before you clean it and or/stow it away.
Always empty the condensation tank. Risk of Electric Shock!
Cleaning
1. Disconnect the power supply.
2. Allow device to cool down.
3. Use a dry cloth to remove dust on the outside of the device.
4. Clean the ventilation slots at regular intervals with vacuum or soft brush to
remove dust and dirt.
5. Make sure to remove all water from the condensation tank before storing.
TROUBLE SHOOTING GUIDE
PROBLEM
CAUSE
The main plug is not
The device does not seem
connected with the main
to be working.
power supply.
The condensation tank
is full or not inserted
correctly.
The condensation tank
The device has switched
is full.
off during operation.
SOLUTION
Insert the main plug into
the main power supply.
Empty the condensation
tank. Insert into the device
correctly.
Empty the condensation tank.
E-5
Tabla de contenido
