Getting Started - Celestron HomeCast 47021 Manual Del Usario

gEtting startED

main Unit:
• Open main unit battery compartment cover (C2).
• Insert 2 x AA batteries.
• Replace cover.
• Use a pin to press the rEsEt (B6) button on the rear of the main unit.
• The main unit is now ready for use.
outdoor sensor:
• Open main unit battery compartment cover (D3) on back cover.
• Insert 2 x AAA batteries.
• Select the desired channel (default setting is channel 1).
• Replace cover.
installation
• Place the main unit on any flat surface using the hinge out stand (C3), or wall
mount using the wall mount hole (C1).
• Place the remote sensor outside. It can be mounted in a similar way using the
hinge out stand (D9) or wall mount hole (D5).
Note: Transmissions between the main unit and the sensor can reach up to 30m barring
any interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc.
6