Product View - Bissell PETHAIR ERASER 23T6 Serie Guia Del Usuario

Product view

Power Charging
Switch
Indicator Light
Charging
Port
Handle Clip
Rotating
Brush
Assembly
The Pet Hair Eraser Sweeper requires very little
assembly. Remove it from the box and check
it against the illustration to familiarize yourself
with the components listed. The exploded view
drawing with part names will also be helpful if
you should need to order a part at a later time.
1. Assemble the handle by screwing together
two pieces of the metal extension handle.
Place the colored handle grip on top of the
metal extension assembly and twist clockwise
until secure. Screw the handle clip into
the bottom of the metal extension handle
assembly.
2. Place bottom of handle clip into the
opening at the top of the Pet Hair Eraser
Sweeper. Push firmly until the button at the
bottom "clicks" into place in the opening.
3. The Pet Hair Eraser Sweeper must be
fully charged before using. To charge the
unit, plug the DC adapter into a standard
electrical outlet (120 V); plug the opposite
end into the charging port on the back
side of your Pet Hair Eraser Sweeper. The
charging indicator light will illuminate to red
when properly connected and will change
to the color green when fully charged. The
Pet Hair Eraser Sweeper now has a full
charge.
Note: The power switch must be in
the oFF position when charging.
4
w w w . b i s s e l l . c o m
Handle Grip
Metal Extension
Handle
Dirt Cup
Corner Bumpers
DC Adapter
WARNING:
Electric/electronic appliances should not be
subjected to extreme temperatures or high
humidity. Do not store the Pet Hair Eraser Sweeper
in bathing areas or close to stoves, furnaces or
radiators.
Charging cord
with DC adapter
plug
1 - 8 0 0 - 2 3 7 - 7 6 9 1
Handle
Assembly
Plug into charging
port on the
motor side of the
Pet Hair Eraser
Sweeper.