Installing The Wired Control - Baxi RZNK50 Instalación Y Manual De Usuario

Drainage pipe installation
1. The drain pipe should be properly insulated to prevent the generation of
condensation.
2. Pipes should be installed with a downward gradient (1/100-150) to allow the water to
drain away. The pipe should not rise at any point.
4.3.

INSTALLING THE WIRED CONTROL

1. Disconnect the Base panel from the wired controller.
2. Use two screws to fix the base panel to the wall as shown below.
3. Ensure that the connecting cable of the controller is accessible before connecting
the wired controller to the base panel.
4. Join the wired controller connection cable to the indoor unit using the cable provided.
21