Kalorik JK 46670 SS Manual Del Usuario página 7

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

BEFORE THE FIRST USE
Remove all various packaging, stickers, or accessories from both the
inside and outside of the kettle.
Adjust the length of the cord by winding it under the base.
For the perfect taste, operate the cordless water kettle with fresh water
in order to clean any residue left from the manufacturing process.
When the appliance has cooled down, repeat the process 3 times with
fresh water, before rinsing.
OPERATING INSTRUCTIONS
Always remove the kettle from the power base before filling it or
before any operation.
Open the lid by pressing on the lid opening button and fill the tank
with fresh water, paying attention not to fill under the minimum
mark or above the maximum mark indicated on the glass housing
of the kettle.
Close the lid by pressing down until it you hear a click. Make sure it
closes correctly.
This appliance must only be used with its matching base and anti-
scale filter.
Make sure the spout filter is well in position, as the auto-shut off
feature might not work.
Place the kettle onto the power base, plug into the wall socket, and
switch on using the on/off switch located on the handle. Blue light
will illuminate, indicating the appliance is operating. If it does not
turn on, check if the kettle is correctly positioned on the base or if
the base is properly plugged in. Do not open the lid while the water
is heating or boiling.
The cordless water kettle will switch off automatically when the water
boils.
The interior blue LED light will also go out once the water reaches
boiling point.
However, you can stop the appliance anytime by switching to off
position or lifting the kettle from the power base.
www.KALORIK.com
7
JK 46670 SS – 200420
Tabla de contenido
loading

Tabla de contenido