Keypad Functions - MEI EC6000 Guía De Puesta En Marcha

On the front of the EC6000 there is a user interface keypad. The keypad has
three LED's and five function buttons.
This keypad allows you to dispense coins from the four-tube dispenser, access
service mode and monitor the status of the EC6000.
1 3 LED's
2 to
A
3 'Mode' Button
The LED's provide a visual indication by light flashes that report the state of the
EC6000. An LED can either be ON, OFF or FLASHING. These light flash codes
can indicate when the EC6000 is operating normally, is in service mode or has a
fault.
(Refer to the LED light code section for more information)
The blue keys (marked A to D) have two functions.
When the EC6000 is in idle mode, pressing a blue button on its own will dispense
a coin from that tube. When you press and hold the blue button for approx. 4
seconds, this activates auto dispense (latch dispensing of coins) until the tube is
empty of coins. If however, the yellow (mode) button is pressed, the blue buttons
are then used for the EC6000 service mode.
Service Mode: gives access to the most frequently used product configuration
options.
(See Service Mode Options - Page 6)

KEYPAD FUNCTIONS

2
3
D
Red, Amber, Green
Dispense coins from coin tubes
Access service mode functions
Page 4 of 10
1