Assembly (continued)
11
Attaching the support panel
□
Attach the support panel (S) to the media shelf (B) by lining
up the holes in the bottom of the support panel (S) with the
holes in the media shelf (B). Insert and tighten two screws
(KK) through the media shelf (B) into the support panel (S).
□
Do not strip the screws (KK) by overtightening.
12
Attaching the top rail
□
Insert four wood dowels (DD) into the unthreaded holes in
the sides of the top rail (J).
□
Line up the wood dowels (DD) in the top rail (J) with the
unthreaded holes in the sides of the left and right front
panels (T & U). Press together firmly until flush.
□
Insert 4 wood dowels (DD) into the unthreaded holes on the
back of the left and right front panels (T & U).
□
Line up the wood dowels (DD) in the left and right front
panels (T & U) with the unthreaded holes in the left and
right side panels (E & F).
□
Line up the long connectors (CC) in the left and right side
panels (E & F) with the holes in the left and right front
panels (T & U). Press together firmly until flush.
□
Attach the top rail assembly to the left and right side
panels (E & F) by inserting two bolts (AA) through the long
connectors (CC) in the left and right side panels
(E & F) and turning clockwise. Do not strip the bolts (AA) by
overtightening.
S
DD
J
U
F
10
KK
B
CC
DD
AA
T
E