Before First Use - Westinghouse WKTT625RG Instrucciones

TOASTER
7

BEFORE FIRST USE

1. Carefully take the device and its accessories out of the packaging. Retain
the packaging in case you would like to store the device away or transport it
at a later date. If you choose to dispose of the packaging, then please do so
according to the applicable legal regulations.
2. Check the packaging contents for completeness and damages. Should the
contents in the packaging not be complete or be damaged, do not use the
device. Return it to your retail outlet immediately.
3. Heat up the device four to five times at level 7 without any bread, in order to
burn off residue from production. During this time ensure that there is sufficient
ventilation (e.g.: the window is open) as a small amount of smoke can be
emitted.
4. Clean the device and all accessories before the first use. Refer to the chapter
CARE AND MAINTENANCE.
USING THE TOASTER
Normal toasting
1. Place a maximum of two slices of bread into the two bread slots.
2. Insert the power plug into a suitable socket.
3. Use the browning control to select the desired toasting setting from 1-6 (If
you using the toaster for the first time, select setting 3. To do so turn the dial
either clockwise or anti-clockwise. With setting 1 the lightest toasting /
browning is achieved, and with setting 6 the strongest. The toasting /browning
can vary depending on the type of bread. We therefore recommend that you
carry out a few tests.)
NOTE: Select a low toasting setting if you are only toasting one slice of bread. If you
toast without interruption, then the bread becomes darker at the same browning
EN
setting due to the heat conduction of the toaster. Let the toast cool down for a
short time after each toasting process.
4
Untitled-1 4
4 5 6
1
2
1. Bread slots
2. Carriage control lever
3
3. Browning control
4. Reheat button
5. Deforst button
6. Cancel button
7. Crumb tray
26/8/2019 11:50:04