Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Chapter 1.1 - Control Panel
On/off switch (1A): A light on the switch will light on to indicate you that the
appliance is switched on (Only models with domestic iron).
On/off iron (1G): By switching it on, the iron soleplate will start to heat up.
Recommended for dry ironing session.
(only with professional iron).
On/off boiler (1F): By switching it on, the boiler will start to heat up. Please note
that iron switch (1G) needs to be switched on for heating up the boiler (only with
professional iron).
When the appliance is switched on and "Steam ready" light (1D) is off, it means that
steam is ready. You can press the steam trigger and steam will escape from the
soleplate. Please note that during use, the light goes on from time to time but you
can continue steam ironing without encountering any difficulties.
"Water tank empty" light (1B) is on: There is no more water in the tank. Please refill
the tank following the instructions of chapter 2.2
"Rinse indicator" light (1E) is on: You should rinse the boiler in order to avoid deposit
s
of scale. Please refer to chapter 4.2 for further instructions. (only models: SRD 4106,
SRD 4108, SRD 4110, SRP 4105)
Auto shut-off" light (1C) is on: After 10mn of non-use of steam, the boiler and the
iron start cooling down. In order to restart ironing, switch off then on the main
switch (1A). You will need to wait a little bit steam is ready before restarting ironing.
Please refer to the steam ready led paragraph for more detail. (only models: SRD
4108, SRD 4110)
Chapter 1.2 - Lock System
In order to facilitate the carrying and the storage of your ironing system, your
appliance is designed with a lock system (2). This system blocks the iron on the
upper tray. It's therefore very easy to move and store the appliance. Please follow
the underneath indications in order to lock correctly your iron on the resting
mat (3).
5 -
GB
Ironspeeed_SR__1-15_union_pprod3.indd 5
11-12-2009 9:59:55
Tabla de contenido
