Tabla de contenido
Idiomas disponibles
Idiomas disponibles
How to Assemble
1. Place the pulp container into
position.
5. Move the locking arm up and
over the juicer cover until it
clicks into place.
840280101 ENv05.indd 5
2. Place juicing bowl into the top
of the motor base. Then place
the stainless steel strainer
basket inside the juicing bowl.
6. Place the removable juice
pitcher lid with froth separator
on the juice pitcher. Place the
juice pitcher with lid under the
juice spout.
BEFORE FIRST USE: After unpacking the juice extractor, remove
cardboard from filter basket and wash everything except the base
in warm, soapy water. Rinse and dry immediately. Never immerse
the base in water or other liquids; wipe it with a damp sponge.
3. With hands on outer edge, press
strainer basket down firmly to
lock into position.
4. Place the juicer cover over the
strainer bowl, positioning the
feed chute over the strainer
basket, and lower into position.
TIP: To minimize cleanup, place
a plastic grocery bag in pulp
container to collect pulp. When
juicing is completed, simply
remove grocery bag containing
pulp.
NOTE: Do not allow pulp
container to overfill since this
may prevent correct operation or
damage the unit.
5/31/2017 10:32:57 AM
5
Tabla de contenido
