Better Homes and Gardens BH17-084-098-48 Manual De Instrucciones página 18

Tools required: Phillips screwdriver, power drill, 3/8" drill bit and rubber mallet.
22. Ask for assistance to position the tower at the desired location against a wall. If necessary, adjust the
pre-attached floor levelers at the bottom of the tower to level the unit. Now, follow the instructions
printed on the plastic bag containing the tipping restraint Hardware to attach the tip-over restraints to
the unit and the wall.
NOTE: Young children can be seriously injured by tipping furniture. You must install the Tipping
Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents or damage. The
tipping restraint is intended only as a deterrent, they are not a substitute for proper adult supervision.
The tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
23. The tower is now ready for use.
Assembly Instructions
18