Allied Data Technologies Tornado TIPA-P Manual De Instalación página 18

TORNADO TIPA-P
Installing in a Windows 95/98 environment
Please note:
Screen dumps are from Windows 98 and may deviate slightly in Windows 95.
During the installation, you may be asked for the original Windows installation CD-ROM.
1. Close Windows and switch off the computer.
2. Mount the Tipa-P in a free PCI slot.
3. Take the RJ45 cable provided and click the plug into the RJ45 connection of your Tipa-P.
4. Switch on the computer and wait until Windows starts up.
5. Windows now produces the message:
'New hardware found' and then goes in
search of drivers for PCI Network
Controller.
Press 'Next' to continue.
6. Allow Windows to search
for the most suitable driver itself,
by selecting the top radio button and then
press 'Next'.
18 Allied Data Technologies