Idiomas disponibles
Idiomas disponibles
USING YOUR CLEANER
1.
Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker. [5]
2.
Adjust the telescopic tube to the desired height by moving the telescopic release
button up and raise or lower the handle to the most comfortable cleaning position.
[6]
Select carpet care control height by pressing the pedal in the nozzle. [7]
3.
Carpet – Brushes are raised for the deepest clean.
4.
Switch the cleaner on by pressing the On/Off Button on the cleaner main body. [8]
5.
Adjust the power control regulator to the desired level. [9]
6.
Adjust the suction regulator to the desired level. [10]
7.
Switch off at the end of use by pressing the On/Off Button. Unplug and press the
cord rewind button to wind the power cord back into the cleaner. [11]
8.
To store your cleaner adjust telescopic tube to the lowest height setting and park the
nozzle in the park position on the cleaner main body. [12]
ACCESSORIES
individual models. All accessories can be purchased separately from Candy. (See Candy
Spares and Consumable section).
3 in 1 tool – Combines several functions in one.The 3 in 1 tool can be stored neatly
underneath the hose handle.
Crevice Tool – For corners and hard to reach areas. [13]
Furniture Nozzle – For soft furniture and fabrics [14]
Dusting Brush – For bookshelves, frames, keyboards and other delicate areas. To
extend the brushes push the button on the body of the tool. [15]
Parquet Caresse Nozzle*
Grand Turbo Nozzle* – Use the turbo nozzle for deep cleaning on carpets.
Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for
deepcleaning on textile surfaces and other hard to clean areas. Particularly suitable for
pet hairs removal.
Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for
deepcleaning on textile surfaces and other hard to clean areas. Particularly suitable for
allergen removal.
IMPORTANT: Do not use the turbo and mini turbo nozzles on rugs with long fringes,
animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary while
the brush is rotating.
(*Certain Models Only)
CLEANER MAINTENANCE
Emptying the Dust Container
When the dust reaches the max level indicator in the container empty the dust container.
IMPORTANT:To maintain optimum performance do not allow the dust to sit higher than
the max level.
1.
Release the container by sliding the bin release button towards the rear of the
cleaner. [16] Lift the dust container from the cleaner main body.
2.
Hold the dust container over a bin with one hand and press the bin container door
open trigger. [17]
3.
level.
IMPORTANT:
IMPORTANT:
1.
Release the container by sliding the bin release button towards the rear of the
cleaner. [16] Lift the dust container from the cleaner main body.
2.
Hold the bin with one hand and with the other hand rotate the bin handle anti
clockwise to release from the bin container. [18]
3.
4.
5.
re-using. [21]
6.
7.
IMPORTANT:
1.
2.
2
using. [22]
GB
[19]
[20]
[21]
[22]
