Operation; Cleaning/Maintenance/Storage; Waste Disposal/Environmental Protection; Replacement Parts/Accessories - Parkside 291642 Traducción Del Manual De Instrucciones Original

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

GB
MT

Operation

1. Push the pipe cleaning hose
(3) at least up to the red safety
marking (7) into the pipe to be
cleaned.
Caution! The red safety marking
must be in the pipe before the
pressure washer is switched on.
The high-pressure jet could cause
injury.
2. Switch on the pressure washer
and squeeze the trigger on the
spray gun (
3. Whilst the nozzle head (5) is mo-
ving through the pipe indepen-
dently, feed in the pipe cleaning
hose (3) manually.
4. To release blockages, squeeze
the trigger several times in a row
then release it.
5. Your progress in the pipe can be
marked with the marking ring
(2). The progress can be read
from the white scale (
the hose, which is spaced at in-
tervals of 1 m.
Cleaning/Maintenance/
Storage
Always remove the mains plug of
the high pressure cleaner before
working on the device.
Otherwise, there is a risk of electric
shock.
• Clean the equipment with a damp cloth.
• The equipment is maintenance free.
• Keep the equipment in a frost-proof
area.
22
8).
6) on
Waste disposal/
Environmental protection
Return the tool, accessories and packag-
ing to a recycling centre when you have
finished with them.
Hand over the device at an utilization loca-
tion.
Ask our Service-Center for details.
Replacement parts/
Accessories
Spare parts and accessories can
be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone
(see "Service-Center" page 23). Please
have the order number mentioned below
ready.
9
Adapter ..................... 30300505
Tabla de contenido
loading

Tabla de contenido