Working Instructions - EGAmaster CLASSIC Serie Manual De Instrucciones

WORKING INSTRUCTIONS

Check that all components are fine and correctly in place.
1. Check that the "Pressure Hose" (black) is correctly connected to the circuit that we want to test.
2. Check that the "Water Entry Hose" (red) is correctly connected to the water source.
3. Switch on the machine.
4. Insert water into the test pump via the "Water Entry Hose" (red).
5. Turn "M" tap (anticlockwise) to enable pressure adjustment.
6. Turn "P" tap to reach the desired pressure.
7. Switch off machine.
8. Disable water entry through red hose.
1
6