WARNING
High voltage
inside unit.
Do not open
this unit.
This unit is
requires a special
power supply
adaptor:
ETU-751PS-01
and must not be
connected
directly to AC
mains power.
"The music
business is a
cruel and
shallow money
trench, a long
plastic hallway
where thieves
and pimps run
free, and good
men die like
dogs.There's also
a negative side."
Hunter
S.Thompson
Music Cocoon MC4
4
Safety Instructions
•
Read instructions – All safety and operating instructions should be read
thoroughly before attempting to operate the Roth MC4
•
Retain Instructions in a safe place for future reference
•
Follow all instructions detailed in this manual
•
Observe all safety warnings given in this manual
•
This unit should NOT be situated in close proximity to water. Avoid placement
near bathtubs, sinks, washing machines, swimming pool, sauna etc.
•
Avoid exposure to direct sunlight or to extremes of temperature or humidity,
•
Do not place near direct heat sources such as radiators, stoves, gas fires, naked
flames or candles
•
Ensure that the unit is placed on a clean, dry and flat surface before operation
•
Do not drop unit, apply excessive force to the controls or place heavy objects on
top of the unit
•
Do not allow excessive levels of dust to gather on the MC4
•
To clean, use a soft dry cloth. If necessary, use a damp cloth without any solvents.
•
Ensure that the area in which the unit is situated has adequate ventilation. Do
not place the MC4 in a position where its ventilation may become obstructed.
Avoid placement on beds, sofas, rugs, enclosed bookcases / cabinets and any
other area which may cause interference to the ventilation of the product thus
causing it to overheat
•
Ensure that the unit is connected to the correct power supply as indicated on
the unit. Unplug the MC4 when not in use for a long period. Always make sure
power cables are placed safely and are not obstructing a walkway
•
This product can get hot. Do not touch the tubes and keep away from babies
and children
•
To avoid risk of electric shock, do not attempt to remover the cover or the back
of unit – there are no user serviceable parts
•
When this product is moved from a cool to a warm place, condensation may
occur on the surface of the vacuum tube. In this instance, please allow 1 hour
before attempting to operate the unit.This will avoid leakage or blow-out of the
vacuum tube due to sudden heat
•
The MC4 should be serviced by an authorised service engineer in the event of
any of the following circumstances
•
The power supply or cord sustains damage
•
The unit is struck by a falling object
•
The unit is exposed to rain or moisture.
•
The unit does not seem to operate normally or exhibits a sudden
change in performance
•
The unit has been dropped
•
Any unauthorised changes or modifications to this equipment would render the
manufacturer's warranty null and void