Installation Instructions - Utilitech Pro WL160208 Manual Del Usuario

INSTALLATION INSTRUCTIONS

Open the Folding Stand
1. Hold the light by one hand and pull the folding
stand (D) out. (Fig. 1a)
2. Adjust the lamp head (C) forward. (Fig. 1b)
3. Place the light to standing position. (Fig. 1c)
4. Adjust the lamp head to preferred position. (Fig. 1c)
The light can be used by itself or mounted on the
tripod (G).
NOTE: If screw (F) on folding stand (D) becomes
loose due to extensive use, use a Torx 20 head
screwdriver and a wrench (neither included) to
tighten.
1a
1b
C
1c
5
A
D
D
F