Apex Digital DT250 Guía De Instalación Rápida

QUICK START GUIDE
Thank you for your purchase of the Apex Digital converter box. Remove the converter box from packaging and
proceed with the following steps for optimal connection and experience.
1
Converter Box Installation
1
Over-the-air Antenna
ANTENNA IN TV OUT
CH 3/4 &
Analog Pass-Through
Yellow
Video Input to TV
* In order to receive digital signals, you MUST connect an over-the-air antenna to your converter box.
** If your TV does not have composite/AV inputs, please refer to the Page 9 in the User's Manual for RF connec-
tion. Your converter box and TV must be set to the same receiving channel (CH3 or CH4) in order to view digital
channels. Receiveing channels may vary between CH3 and CH4 depending on your location.
For additional questions, please visit our website www.apexdigitalinc.com or call us at (866) 427-3946 Monday-Friday, 8am-5pm PST.
Composite/AV Connection
1
Connect your over-the-air antenna
to your converter box
2
Connect Video/Audio inputs
Back of Converter Box
Yellow
VIDEO
SMART
CH 3 CH 4 S-VIDEO
L AUDIO R
ANTENNA
2
White
Red
Audio L / R Input to TV
White
Red
Easy 3 Step Installation
2
Auto Program
Initial Setup Menu
Menu Language
English
Time Zone
Pacific
TV Aspect Ratio
Auto
Auto Program
To Move To Select To Exit
OK EXIT
POWER
Change your TV input mode to
1
VIDEO/COMPOSITE.
3
Scan Channels
Auto Program Menu
Scanning
Searching Channels
Progress (%) 100
* Channels may be deleted or added after Auto Program Channel scan. Please refer to page 15 in the User's
Manual for more information.
DT250
GREEN LED - ON
RED LED - OFF
Power converter box ON. An
2
"Initial Setup Menu" will automati-
cally start up. Use the arrow
buttons to select "Auto Program"
and press "OK" to initialize.
Allow the progress bar to scan
untill 100% for all available digital
channels. Once Auto Program
scan is complete, the first scanned
channel will display.