mixars MXR-4 Manual Del Usuario página 4

1 Power On / Off switch,
AC-In (with Internal wide-voltage swing linearpower supply for excellent audio dynamics )
and AC mains voltage selector switch 115/230V
2 1 x Balanced (XLR), 2 x unbalanced main outputs and 1 x Unbalanced record output
3 4 multi-source stereo inputs (2 x Phono (Line)/Line/USB), with gain control,
3-band Kill-EQ (+12/-26dB) and 10-LED level meter
4 2 x Mic inputs (1x Combo/1x TRS connector) with level
control, mutual 2-band EQ, individual "on air" switches
and manual talk-over
5 4-deck multichannel USB 2.0 soundcard with low-latency ASIO drivers
and 24Bit/96kHz studio-grade converters
6 Fully assignable 45mm smooth dual-rail crossfader, front detachable/exchangeable,
with switchable steep/flat transition curve, reverse switch and
Internal preparation for InnoFader™ refit
7 Smooth dual-rail 60mm channel input faders
8 High-power dual headphone output (6.35+3.5mm TRS)
9 PFL section with PFL/Main mix and Blend/Split option
10 Master section with two separately controllable outputs
and assignable dual 10-LED level meter
11 DSP effects processor for the main output
(serial & parallel effects):
Flanger | Phaser | Chorus | Hp-Filter | Lp-Filter | Gate / Stutter | Panner | Pitch Shifter |Vocoder |
Lo Fi | Hall-Reverb | Gated Reverb | Reverse | Single Delay | MultiTap Delay | PingPong Delay |
+2 Detuned | Sub Synth
-One parameter and mix ratio settable for effects
-Dual (Main/PFL) Auto-BPM with effects synchronization
-LED display for effects processor
EN 3