Trevi IP 360 S8 Manual Del Usuario página 16

21. MICROPHONE
22. LED INDICATOR
Installing the Batteries
Remove the battery cover from the Remote Control and put 2xAAA size batteries inside
the compartment. The diagram inside the Battery Compartment shows the correct way
to install the batteries.
Air mouse wreless is an input device with integrated gyroscope and acceleration and
gravity sensor, thus allowing control of the cursor by means of movement and rotation of
the wrist. Its use is simple and intuitive and makes navigation, selection and digitization
convenient and quick.
Before using the supplied remote control carefully follow the following steps:
• Remove the remote control from the box and open the battery compartment located in
its lower part;
• Insert 2 "AAA" size batteries respecting the polarity indications on the cabinet and close
the battery compartment;
• Remove the transceiver and connect it to a USB socket on the unit (see image below);
• At this point you can turn on the unit and start using your remote control by simply
moving the wrist of your hand.
Air Mouse has 3 levels of cursor speed:
From Slow to fast:
Press and hold the "ok" (19) and "Volume +" (17) keys, the LED indicator (22) will flash
3 times and then remain fixed to confirm that the setting has been made.
From Fast to slow:
Press and hold the "ok" (19) and "Volume -" (17) buttons, the LED indicator (22) will flash
3 times and then remain fixed to confirm that the setting has been made.
Sensor calibration
Sensor calibration takes place automatically.
The changes in voltage and temperature can affect the movement of the cursor, in this case,
rest the mouse on a table for a few minutes, then press any key to reactivate it.
Voice command
Using the Browser, select the microphone icon
near the microphone (21) and speak.
If you want to use the Google assistant, select the "Assistant" icon, put your mouth near
the microphone (21) and speak.
on the search band, put your mouth
16
IP 360 S8