Care And Maintenance - Project Source 21-K822-PSD Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
7. After installation is completed, remove aerator. Turn on
water supply and allow both hot and cold water to run
for at least one minute each. While water is running,
check for leaks. Tighten nuts slightly to stop minor leaks.
If problems persist, refer to troubleshooting chart.
Replace aerator.
OPERATING INSTRUCTIONS
1. To create a moderate water temperature, turn both
handles (1.1) open. Slight adjustments of either handle
(1.1) will cause the water temperature to increase or
decrease.

CARE AND MAINTENANCE

Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these
will dull the finish and void your warranty.
7
1
1.1
6
Lowes.com