Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

DCE040
D
WALT CONNECTOR FOR USE WITH 20V MAX* TOOLS
e
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of
personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
WARNING: To reduce the risk of injury, read the instruction manual.
If you have any questions or comments about this or any D
(1-800-433-9258).
GENERAL SAFETY WARNINGS
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
1 . This device contains a factory-installed coin cell battery. It cannot be removed or replaced.
2 . Chemical burn hazard. Keep out of reach of children.
3 . Do not use in extreme hot or cold conditions. Keep between -10° C to 40° C (14 F° to 104° F).
4 . Do not force open the device as the coin cell battery can cause severe internal burns and lead to death in as little as 2 hours
if swallowed or otherwise enters the body. If the device is damaged in any way, stop using the device and keep it away from
children. If you think batteries may have been swallowed or entered the body, seek immediate medical attention.
5 . If coin cell battery contents come into contact with the skin, immediately wash area with mild soap and water. If coin cell
battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is
needed, the battery electrolyte is composed of an organic solvent and lithium salts.
6 . Do not incinerate or dismantle this device.
7 . Under abusive conditions, liquid may be ejected from the device. Avoid contact. If contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
8 . DO NOT dispose of device together with household waste material! Appliance that has reached the end of its life must be
collected separately and returned to an environmentally compatible recycling facility.
9 . Do not expose device to moisture.
10 . Follow all warnings and instructions for tool and battery pack with which the device will be used.
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V ......................... volts
Hz ....................... hertz
min ..................... minutes
or DC ...... direct current
...................... Class I Construction (grounded)
.../min .............. per minute
BPM .................... beats per minute
IPM ..................... impacts per minute
RPM .................... revolutions per minute
sfpm ................... surface feet per minute
SPM .................... strokes per minute
A ......................... amperes
W ........................ watts
or AC ........... alternating current
Storage Recommendations
The best storage place is one that is cool and dry, away from direct sunlight and excess heat or cold.
Wireless Certifications and Safety Information
This device is CAN ICES-3(B)/NMB-3(B) compliant.
This device complies with Part 15 of the FCC rules and Industry Canada License-exempt RSS standard(s). Operation is subject to
the following two conditions:
ʵ This device may not cause harmful interference, and
ʵ This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
ʵ Reorient or relocate the receiving antenna.
ʵ Increase the separation between the equipment and adaptor.
ʵ Connect the equipment into an outlet on a circuit different from that to which the adaptor is connected.
ʵ Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to
operate the device. This Class B digital apparatus complies with Canadian ICES-003.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
To comply with FCC and Industry Canada RF radiation exposure limits for general population, the antenna used for this device
must not be co-located or operating in conjunction with any other antenna or transmitter.
For Bluetooth® Products
When traveling on airlines, be sure to comply with the airline restrictions on usage of personal electronic devices and
Bluetooth®.
The out of range alert feature has been designed to act as an aid to warn against products getting misplaced or stolen. It is not
a security system.
The connectivity range is up to 100 feet (30.5 meters) depending on environment and location.
The shortwave radio frequency signals of a Bluetooth® device may impair the operation of other electronic and medical devices
(such as pacemakers or hearing aids).
NOTE: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®, SIG, Inc. and any use of such
marks by D
WALT is under license. Other trademarks and trade names are those of their respective owners.
e
INTENDED USE
When installed, this DEWALT Connector enables DEWALT cordless power tools with Bluetooth® connectivity. The power tool
can now be located, enabled and disabled via the Tool Connect™ App. Power tool features cannot be customised as they can
on DEWALT Bluetooth® power tools. Enable/Disable does not function with lighting products.
WALT tool, call us toll free at: 1-800-4-D
WALT
e
e
or AC/DC .... alternating or direct current
...................... Class II Construction (double insulated)
n o ....................... no load speed
n ......................... rated speed
...................... earthing terminal
..................... safety alert symbol
..................... visible radiation
..................... wear respiratory protection
..................... wear eye protection
..................... wear hearing protection
..................... read all documentation
...................... Tool Connect™ home
...................... permanent tool attachment
Fig. A
1
ENGLISH
IMPORTANT: CONNECTOR
ATTACHMENT IS PERMANENT!
IMPORTANT : L'INSTALLATION DE
CE CONNECTEUR EST PERMANENTE!
IMPORTANTE: ¡EL ACCESORIO
CONECTOR ES PERMANENTE!
D
WALT Tool Connect™
e
This D
WALT Connector is capable of connecting with mobile devices that support Bluetooth® Smart (or Bluetooth® 4.0)
e
technology. (To see if your mobile device is compatible, visit: http://www.bluetooth.com/Pages/Bluetooth-Smart-Devices-List.
aspx)
D
WALT Tool Connect™ is an application for your smart device (such as a smart phone or tablet) that can connect and control
e
your D
WALT Connector.
e
NOTE: The Tool Connect™ App is governed by separate terms and conditions available for viewing through the
mobile application.
Activating the D
WALT Connector (Fig. A)
e
IMPORTANT: ACTIVATE AND TEST THE CONNECTOR WITH THE TOOL CONNECT™ APP BEFORE IT IS ATTACHED TO
THE TOOL. ONCE THE DEWALT CONNECTOR IS INSTALLED IN THE TOOL, IT CANNOT BE REMOVED BY THE USER. Take
the connector and the tool to a D
e
Download the D
WALT Tool Connect™ application at:
e
Install a fully charged 20V Max* battery pack into the D
the tool. Refer to tool instruction manual.
Follow the instructions in the app to create your Tool Connect™ account.
On the Home screen of the app, select "+ Tool" to begin the process of adding your connector to the app.
To pair your connector with the D
of the connector until the blue LED begins to blink. The connector can only be connected to one Tool Connect™ account
at a time.
Once the connector has been connected, you can confirm that you would like to register the product.
For more information on D
WALT Tool Connect™ functionality and features, please call 1–800–4-D
e
visit www.D
WALT.com or view the FAQ page and help screens located inside the mobile application.
e
Installing the D
WALT Connector into Tool (Fig. A)
e
IMPORTANT: ONCE THE DEWALT CONNECTOR IS INSTALLED IN THE TOOL, IT CANNOT BE REMOVED BY THE USER.
Take the connector and the tool to a D
IMPORTANT: BEFORE INSTALLING THE DEWALT CONNECTOR INTO YOUR TOOL, RECORD THE TOOL'S SERIAL
NUMBER AND DATE CODE THAT WILL BE PERMANENTLY COVERED UP BY THE CONNECTOR ONCE INSTALLED.
Record below for future reference:
Tool Type: _______________________________________________________
Tool Cat Number: _________________________________________________
Tool Serial Number: ________________________________________________
Tool's Date Code: __________________________________________________
1. Remove the tearoff label from the Connector.
2. Align the D
WALT Connector with the rails inside the tool's handle.
e
3. Slide the connector into the handle until it is firmly seated in the tool (you will hear a click) and ensure that it does not
disengage.
4. If you have not already done so, install a 20V Max* battery pack into the D
a battery pack into the tool. Refer to tool instuction manual.
Voltage
Weight
MAINTENANCE
Cleaning

WARNING: Never use solvents or other harsh chemicals for cleaning the connector. These chemicals may weaken the
plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside
the connector; never immerse into a liquid.
Repairs
The connector is not serviceable.

WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection
and replacement, when applicable) should be performed by a D
service center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case there is a
problem with your product.
CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration of ownership
will serve as your proof of purchase.
FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.dewalt.com/register.
D
WALT will replace any defective connector any time within 3 years after purchase.
e
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-D
(1-800-433-9258) for a free replacement.
* Maximum initial battery voltage (measured without a workload) is 20, 60 or 120 volts. Nominal voltage is 18, 54 or 108.
(120V Max* is based on using 2 D
e
WALT service center for removal.
WALT Connector as you normally would install a battery pack into
e
WALT Tool Connect™ app, at the appropriate screen, press the button
e
WALT service center for removal.
e
WALT Connector as you normally would install
e
Specifications
DCE040
V
20
DC
0.12 kg/4.0 oz
WALT factory service center or a D
e
3 YEAR FREE SERVICE
WALT 60V Max* lithium-ion batteries combined.)
1
on the front
WALT (1–800–433–9258),
e
WALT authorized
e
WALT
e
loading

Resumen de contenidos para DeWalt DCE040

  • Página 1 IMPORTANT: ACTIVATE AND TEST THE CONNECTOR WITH THE TOOL CONNECT™ APP BEFORE IT IS ATTACHED TO THE TOOL. ONCE THE DEWALT CONNECTOR IS INSTALLED IN THE TOOL, IT CANNOT BE REMOVED BY THE USER. Take 1 . This device contains a factory-installed coin cell battery. It cannot be removed or replaced.
  • Página 2 Si cree que las pilas han podido ingerirse o entrar en el cuerpo, busque atención Lorsqu’il est installé, le connecteur DEWALT active les outils électriques sans fil DEWALT grâce à la connectivité Bluetooth®.
  • Página 3 Lleve el conector y la herramienta a un centro de servicio D WALT para que sea extraído. IMPORTANTE: ANTES DE INSTALAR EL CONECTOR DEWALT EN SU HERRAMIENTA, ANOTE EL NÚMERO DE SERIE Y EL CÓDIGO DE FECHA DE LA HERRAMIENTA QUE QUEDARÁN CUBIERTOS PERMANENTEMENTE POR EL CONECTOR UNA VEZ QUE SE INSTALE.