General Specifications; Electrical Specifications; General Safety Information - GAMCO DR-5708 Manual Del Usuario

Description
Gamco warm air hand dryer, powered by a high speed universal motor, delivering 2300 Watts of drying power. This hand dryer runs
on 115 Volts AC, 208/220-240 Volts AC, or 277 volts AC electrical supply, depending on model. Automatic and push-button models are
represented in this product group. This appliance is intended for use in hand drying, contributing to hygienic and cost effective hand
sanitation. This hand dryer may be used in commercial, industrial, office and public facility environments.

General Specifications

Basic Models Nozzle Drying Cycle
DR-5708 Fixed Automatic

Electrical Specifications

Models Type
DR-5708 Automatic

General Safety Information

Failure to disconnect the power source before installation or servicing can result in
DANGER
serious injury or death from electric shock.
• Always disconnect the power source before servicing or installing the hand dryer.
DANGER
Failure to properly ground this unit could result in severe electrical shock and/or death.
• This hand dryer must be properly grounded (Earthed) for safe operation. An identified ground connection point is supplied on the
hand dryer's wall base.
• We recommend GFCI protection in wet or damp locations or as required by local code.
WARNING
• Use only the electrical power (voltage and frequency) specified for the model hand dryer being installed.
• Connect the hand dryer to the nearest suitable distribution panel.
• To limit a voltage drop, and insure efficient operation, use wire gauge as required by local or National Electrical Code.
• Do not connect to a branch circuit with CB or fuse protection over 20 Amps. This is in compliance with The National Electrical Code
#210-20.
• All automatic model hand dryers must have a dedicated 20 Amp circuit as required by Underwriters Laboratories, Inc. (UL).
• Route all field wiring away from any moving parts within the hand dryer.
CAUTION
Unpacking
1. Remove all packing material. Recycling is recommended.
2. Carefully remove the hand dryer from the shipping carton, using care not to drop the appliance.
3. Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or damaged parts. If the hand dryer is damaged,
promptly inform the shipper or dealer where you purchased it
Form No. DR-5708
68-10215 rev01
Dimensions (WxDxH)
11.38" x 9.62" x 8.12"
Electrical Input
115 VAC, 60 Hz
Risk of fire, personal injury or property damage are possible if local codes, NEC codes
or safety recommendations are not followed.
Improper mounting could result in personal injury or property damage.
Multi Language (Rev 10/9/13)
Amperage
20
.
© 2013 Gamco Commercial Restroom Accessories, A Division of Bobrick
2
Weight
18 / 29 lbs
(cULus Listed, E43125,
Watts
CE TUV-GS)
2300
Cover Material
Steel/Cast Iron
Printed in U.S.A.