Care And Maintenance - Amcrest WLD895 Manual Del Usuario

Troubleshooting
You aren't getting any signal at all
Ÿ Make sure the camera and the monitor are turned on.
Make sure the power plugs are pushed all the way in.
Ÿ
If the signal is poor, or there is interference
If there is a microwave oven in use in the path between camera and
Ÿ
monitor, remove the microwave oven or turn it off.
Make sure the camera and the monitor are within range of each other.
Ÿ
(range of approximately 1000 feet; 300 meters in a clear line of sight)

Care and Maintenance

Keep all parts and accessories out of children's reach.
Ÿ
Fingerprints or dirt on the lens surface can adversely affect camera
Ÿ
performances. Avoid touching the lens surface with your fingers.
Should the lens become dirty, use a blower to blow off dirt and dust, or a
Ÿ
soft, dry cloth to wipe off the lens.
Do not attempt to open the case. Non-expert handling of the device may
Ÿ
damage the system.
Avoid dropping or strong shocks.
Ÿ
Only operate this product with the included power supply or one provided as
Ÿ
an accessory.
Do not overload electrical outlets or extension cords. This can result in fire
Ÿ
or electric shocks.
Specifications
Camera
Frequency
Antenna
Transmission distance
Modulation
Image Sensor
Effective pixels
Lens
IR LED
Dimensions(WxHxD)
Weight
Power
Operating temperature
Specifications subject to change without notice
This item is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
2.4 GHz
Dipole antenna
300m (Line of Sight)
GFSK, FHSS
Color CMOS
1280H x 720V pixels
f3.6mm, F 2.2
20 pcs (10 meters)
129 x 60 x 67 mm (W/O stand)
460 g
DC 9V, 800mA
-10℃ ~ 50℃ (14℉ ~ 122℉)
Monitor
Frequency 2.4 GHz
Antenna Monopole antenna
LCD Screen Size 7-inch
Display colors Full-color
Motion Alarm Yes
Dimensions(WxHxD) 198 x130 x 28 mm
Weight 430 g
Power DC 5V, 2A or 3.7V Li-Polymer battery
Operating temperature 0℃ ~ 40℃ (32℉ ~ 104℉)
31