Function Setting; Auto-Power Off Function; Division Selection; High And Low Limits Setting - Gram D1-1000 Manual De Utilización

FUNCTION SETTING

Under normal weighing mode, press the
choose menu and press

AUTO-POWER OFF FUNCTION

1. Display shows "S-OFF"
2. Press the
3. Display shows "A-X"
4. Press the
0 = Auto-power off disable.
1 = Balance will auto-power off after 1 minute of non use.
3 = Balance will auto-power off after 3 minutes of non use.
5 = Balance will auto-power off after 5 minutes of non use.
10 = Balance will auto-power off after 10 minutes of non use.
15 = Balance will auto-power off after 15 minutes of non use.
30 = Balance will auto-power off after 30 minutes of non use.
.... And so on.
5. Press the

DIVISION SELECTION

1. Display shows "S-d"
2. Press the
3. Display shows "d=xx"
4. Press the
5. Press the
HIGH AND LOW LIMIT SETTING
a) Setting alarm type
1. Display shows "S-Alr"
2. Press the
3. Select the desired mode:
Alr-0= means alarm forbidden
Alr-1= means alarm in the range
Alr-2= means alarm out the range
key to enter in selected menu.
key to enter into.
to select the desired mode:
key to confirm and come back to normal weighing mode.
key to enter into.
key to choose division
key to confirm and come back to normal weighing mode.
key to enter into.
for 2 seconds, press the to
5