Tabla de contenido
CONJ. DE PLACA DE IDENTIFICACIÓN Y CALCOMANÍAS
1
1
11
QUALITY
MANAGEMENT SYSTEM
CERTIFIED ON
ISO 9001:2008
518524
10
9
CAUTION
INSPECT BEFORE TOWING
TIGHTNESS OF WHEEL NUTS
4
TIRE PRESSURE
1. Use manufacturer's recommended torque values
when tightening wheel lug nuts.
2. Use manufacturer's recommended tire pressure
values when inflating tires. DO NOT exceed
recommended tire pressure.
NOTE:
SAME POSITION ON OPPOSITE SIDE
1
OF CABINET.
PÁGINA 34 — HORMIGONERA MC12PH • MANUAL DE OPERACIÓN Y PIEZAS —REV. 3 (5/SEP/19)
1
3
1
WARNING
To avoid injury, you
read and
MUST
understand operator's manual before
using this machine.
Keep safety grate, guards and doors
in place. Shut off engine or electric
motor before inspection or maintenance.
Moving parts can cut and crush.
SHUT OFF
engine or electric motor
before placing hands in mixing drum.
This machine to be operated by qualified
personnel only. Ask for training as needed.
P/N 521229
CAUTION
INSPECT BEFORE TOWING
TIGHTNESS OF WHEEL NUTS
TIRE PRESSURE
1. Use manufacturer's recommended torque values
when tightening wheel lug nuts.
2. Use manufacturer's recommended tire pressure
values when inflating tires. DO NOT exceed
recommended tire pressure.
P/N 521232
REAR VIEW
ENGINE COVER
4
P/N 521232
2
SAFETY
INSTRUCTIONS
1. Read owner's manual
before operating.
2. Keep unauthorized and untrained
people away from machine during
operation.
3. Make sure all safety devices are in
place before this machine is started.
4. Make sure engine is turned off and
spark plug wire is disconnected before
cleaning the machine.
5. Keep hands and fingers away from
moving objects.
6. Do not operate machine in an enclosed
area, proper ventilation is required.
7. Never leave machine unattended when
operating.
8. Always stop engine and allow engine
to cool before adding fuel or oil.
520935
5
CAUTION
DRUM LOCK POSITIONING
SEE OPERATION MANUAL FOR PROPER
DRUM LOCK POSITIONING
LEGEND
REPRESENTS LOCK PIN
REPRESENTS DRUM STOP BLOCK
MIX
TOW
P/N 521231
6
7
8
Tabla de contenido
