Tabla de contenido
Idiomas disponibles
Idiomas disponibles
14. Repeat for opposite side.
15. Secure brackets to tower using #6 3/4 in. screws.
STEP 5 - Installing Top Shelf & Tower
It is recommended to install hardware into wall studs. Typically 16 in. on
center. Use 50 lb. wall anchors provided if no stud is present.
On the top level line space shelf mounting L-clip hardware equidistant in
the following manner:
•
3 L-clip hardware within the 48in. shelf location
•
2 L-clip hardware within the tower top location
1.
Center the top screw hole of the shelf mounting L-clip hardware with the
level line & mark all hole locations.
2.
Secure L-clip to wall using #8 1 1/2 in. screws at hole locations (Use wall
anchors provided if no stud is present).
3.
Repeat for remaining L-clip locations.
5
4.
Place a shelf end onto the wall end of the shelf.
5.
Place shelf onto L-clips.
6.
Level shelf front to back & mark shelf end hardware location on wall.
Make sure level is positioned on front & back rail. NOT SLATS. If level is
placed on slats the shelf will not be level.
7.
Remove shelf.
8.
Align shelf end hardware with the mark & mark screw hole locations.
9.
Secure shelf end to wall using #8 1 1/2 in. screws at hole locations (Use
wall anchors provided if no stud is present).
10. Place shelf onto hardware.
11. Place tower onto L-clips.
12. Flush tower with top shelf & plumb level tower side.
13. Mark tower bracket hole locations on wall.
14. Place shelf end hardware onto end of top shelf.
15. Level shelf front to back & mark shelf end hardware location.
16. Remove shelf & tower.
Tabla de contenido
