Sonia IZAR H1106 Manual De Instrucciones página 2

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

DDUUEETT EUROPE would like to thank you for choosing
Sonia products. We hope that this instruction manual will
help you get the most out of this product.
If you have any doubts regarding its use and/or operation,
please contact your distributor.
FOREWORD
● Please read the entire instruction manual carefully before
using the product. Take note of any warnings included in
this manual.
● Always keep this instruction manual handy and if you give
the device to another person, hand over the manual as it is
an essential part of the product.
● Some components of the product may differ from the
image that appears in catalogues, websites, brochures,
etc.
● In order to enhance the product, the manufacturer
reserves the right to modify its features and/or
components without prior notice.
CORRECT USE OF THE DEVICE
● This product has been designed to be used by beauty
professionals at beauty salons and should not be used for
other purposes.
● Please note that any misuse of the device entails the loss
of the guarantee.
● Do not make any modification to the device without the
authorisation of DDUUEETT EUROPE SL.
● DDUUEETT EUROPE SL shall not be held liable for any
material or personal damage due to the misuse of the
product.
PRECAUTIONS AND SAFETY INDICATIONS
● Before using it for the first time and after each use, check
the device and the mains cable for any damage.
● Unplug the device from the mains before starting to clean
it or undertaking any type of maintenance.
● Do not use the product outdoors or in places where it may
be affected by humidity or inclement weather.
● If the power supply cable is defective, unplug the
appliance immediately and inform your dealer or
specialised technician.
● Position the power supply cable properly so that people
cannot trip over it and make sure you plug it into an
earthed socket.
● At the end of the working day, disconnect the device and
unplug the power supply cable from the mains.
● If you detect any anomaly in the operation of the product,
please contact your distributor or specialised technician.
● The device and accessories should be kept out of the
reach of children.
● Only plug the device into a properly installed socket. The
local mains voltage must correspond to the technical
specifications of the device.
● The power socket must be accessible in case you have to
quickly unplug the device at any given time.
EN
2
● Always pull out the actual plug and not the mains cable.
● Never tamper with any electrical component or open up/
repair any component of the device.
● Only your distributor or specialised technician should
repair the device.
● Do not switch on the device if there is visible damage to it
or to the mains cable.
● Never touch the device or the mains cable with wet hands.
● The use of distilled water is recommended to extend the
useful life of the steamer components.
● Before operating the facial steamer, make sure the filler
cap and the water tank have been properly attached and
tightened, and that the water level is between the "MAX"
and "MIN" level indicators.
● Check the safety distance between the mouthpiece and
the patient's face, as inadequate distance may cause skin
burns.
● Before adding essential oil, please ensure that the steamer
is in standby mode.
● Never add essential oils directly into the water tank.
● Wait until the steam is produced steadily before starting
the treatment.
● The ozone function should be used according to the
professional's criteria depending on the type of skin to be
treated.
● If you need to remove the water tank, disconnect the
steamer from the mains and wait for the water to cool
down.
● If you notice a water leak, unplug the steamer from the
mains. Then check if the water tank is properly positioned.
If the problem persists, contact your dealer.
CONTENTS
Item
Image
Main unit + steamer
arm
Extendable column
Foot + wheel
Base for the 5 feet
Base clamping plate
Attachment kit
Tightening tool
Cotton wool for
essential oil
Conical part
Instruction manual
Units
1
1
5
1
1
1 kit
1
1 kit
1
1
Tabla de contenido
loading

Tabla de contenido