Metra 70-1765 Instrucciones De Instalación

INTERFACE FEATURES
• Wiring harness for installing an aftermarket radio
• Provides power and four speakers
• Retains balance and fade
• Designed for non-amplified models
INTERFACE COMPONENTS
• 70-1765 harness:
• 28-pin harness • 10-pin harness
• 30-pin harness • 12-pin pre-wired ASWC-1 harness
Metra. The World's Best Kits. ®
Toyota Camry / Sienna
2018-up*
*Visit MetraOnline.com for up-to-date vehicle specific applications.
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains the factory backup camera
• Retains the factory AUX-IN jack
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
MetraOnline.com
(without amplifier)
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
70-1765
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections to be made .......................................2
OPTIONAL ACCESSORIES (sold separately)
12V to 6V Step-Down Converter: AX-CAM6V
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 11/8/18 INST70-1765