Selecta FRIGEDOR REG Manual De Instrucciones página 11

MANUAL DE INSTRUCCIONES CODIGO 80040 REV D Nov/2017
J
.P. SELECTA s.a.u.
CONTROL PANEL:
- Place the refrigerator coils inside the liquid container that must
be cool down.
- Connect the Pt100 temperature probe (4) in the connector (3).
- Place the probe inside the test liquid. It is preferable that it is
not in contact with the bucket or the coil. You can use a bracket
and a clamp to do this.
- Activate the control panel switch with operating light indicator
(green).
- Select the operating temperature with the keys (7). The tem-
perature selection is shown in the display (10).
TEMPERATURE CORRECTION:
You can correct the temperature displayed on the screen if
contrasted with a more accurate thermometer.
- Press the key (6) scroll parameters. The display (11) will show
"SHIFT" and the display (10) will show the correction value in
grades whose default value is "0".
- Press keys (7) to modify the value.
- Press key (6) or (8) to validate and exit from the menu.
Example 1:
If the standard thermometer indicates 10°C while the Frigedor unit
temperature control indicates 9ºC. The value to be entered is 1.
Example 2:
If the standard thermometer indicates 10ºC while the Frigedor unit
temperature control indicates 11ºC. The value to be entered is -1.
Note: The temperature controller is configured to display tenths
of a degree, as the compressor timing system ON / OFF does not
guarantee a greater precision.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso)
Tel (34 3) 770 08 77 Fax (34 3) 770 23 62
Pag.: 11