Idiomas disponibles
Idiomas disponibles
ENGLISH
INSTALLATION & SETTINGS
Your robot is installed and programmed by a
Eurogreen-approved professional, who will teach
you how to operate the robot's functions. This
quick guide is a reference, for use in addition to
the downloadable Operator Manual.
ROBOT REGISTRATION
Activate your robot's guarantee and access the
app. Download the Operator Manual and read it
carefully. Do not allow other people to use your
robot unless they have read the Operator Manual.
POWER ON / OFF
The main power switch is located on the rear
right-hand side, under the bodywork. In case of an
extended idle period, particularly when the robot is
stowed away for the winter, set the switch to OFF.
SWITCH ON
Press the green button and hold for five seconds.
The robot start-up procedure takes approx.
2 minutes and it's then ready to go.
SAFETY INSTRUCTIONS
The safety instructions must be strictly obeyed.
Switch
The robot
the robot
can be
off before
dangerous if
working on
misused
or lifting it
Read the
Always stop
Operator
the robot
Manual
and wait for
before using
the cutting
the robot
blades to
stop before
handling the
robot
Never place
Keep the
hands or
animals
Beware of
feet under
away from
projectiles.
the robot,
the robot,
Keep a safe
when
when
distance
operating
operating
Always
Do not ride
Supervise
keep a safe
the robot
children and
distance
anyone with
from the
reduced
robot, when
physical,
operating
sensory
or mental
capabilities
START
Press the "Actions" button to start mowing. You
can also access many other features (refer to
Operator Manual).
STOP
To stop your robot, press the red button.
CHECK
Inspect your robot at least once a week. Set the
main power switch to OFF. Check the condition of
the blades and check that the cutting heads can
rotate freely. Remove any clumps of grass that are
stuck to the wheels.
SERVICING
Arrange for an Eurogreen-approved professional
to inspect your robot at least once a year, and
whenever you notice an incident or a deterioration
in performance.
Water
cleaning
with high
The robot is
pressure
protected by
jet systems
an access
can cause
code
damage
Protective
The robot
gloves
is equipped
must be
with an anti-
worn when
theft system
handling
the robot,
especially
the cutting
system
