Festo SB-202 Manual Del Usuario página 11

SB-202 - 03/05
1
User instructions
The control block SB-202 for valve terminals types 03 ... 05 is
intended exclusively for use as follows:
–
for controlling pneumatic and electric actuators
–
for interrogating electrical sensor signals by means of the
input module.
The limits in the technical specifications must be observed.
Detailed information can be found in the pneumatics manuals
P.BE MIDI/MAXI-... and P.BE ISO-... and in the electronics manual
P.BE-SB-202-03/05....
WARNING
• Switch off the power supply before you connect or
disconnect plugs (danger of functional damage).
• Connect a protective earth conductor with sufficient cross
section to the connection marked with
valve terminal is not fitted on an earthed machine stand.
PLEASE NOTE
Only operate a valve terminal which is completely fitted and
electrically wired.
9709 NH
, if the
11