Mopar Jeep Wrangler 2007 Instrucciones Para La Instalación página 4

Overview
The security module harness will interface with the existing ignition switch connec-
tor, horn, parking lights, power doorlock & door trigger connections, and a ground
termination.
Vehicle Preparation
Remove driver's side lower dash panels,
& steering column shroud.
A. Pull down on lower dash. Panel is
held by clips. Start at the top corners.
Remove panel.
B. Remove (3) bolts holding metal panel
in place. Pull up on the panel to
remove.
C. Remove lower plastic dash panel.
Panel is held by clips.
D. Remove (3) screws from steering
column shroud. Separate and remove
steering column shroud.
E. Remove driver's side kick panel/sill
plate. Panel is held on by clips.
4