Trinity Amplified HDTV Antenna
Quick
Start Guide
Find the best location for your
1
antenna.
Antenna Placement Tips
Avoid metal surfaces (like a metal stand).
Move the antenna close to or in a window.
Position the antenna as high as possible.
2
Place the antenna.
Place the antenna on a flat surface next to your TV,
facing the direction where most of your broadcast
towers are located.
Alternate Mounting Option
This antenna can be mounted to a wall as well. To mount this
antenna to a wall: Install the included wall-mount screws (and
anchors, if needed) where desired. Align the keyholes on the
bottom of the antenna with wall-mounted screws, then lock the
antenna into place.
3
Raise the antenna's three
elements.
STOP!
TV antennas perform best
when facing the direction of
the broadcaster's tower.
For help finding your local
broadcast towers, go to
www.TERK.com
Raise the three
elements to their
upright position for
best performance.
For wall-mounting,
raise the three antenna
elements to their full
180-degree position.
DO NOT RETURN this product to the store!
Please call our toll-free help line at 1-800-768-1969
or visit TERK.com
Check out setup videos at
www.TERK.com/Setup
Connect the antenna to the
4
provided amplifier
Antenna (back)
Built-In
Coaxial Cable
You can use this antenna with or without
its amplifier. Try with the amplifier first—it
provides the best performance in most
ANTENNA
Amplifier
situations.
TV/STB
Connect the amplifier to your TV
5
or digital converter box.
Amplifier
Plug in the amplifier's power cord
6
to a power outlet.
7
Scan for channels on your TV.
Most TVs have a channel scan option in their menu
system, many times in a SETUP or CHANNEL menu
under ANTENNA. For detailed instructions on
performing a channel scan, see the owner's manual
that came with your TV.
IMPORTANT: For some channels you might get better
performance with the Trinity antenna in a different position
or facing a different direction. Sometimes just a little bit of
adjustment can make a difference!
TRITVA2Z QSG 00
IMPORTANT: Don't plug the
amplifier's power cord into a power
outlet yet.
IMPORTANT:
Make sure
TV or
your TV is
converter
turned off.
ANTENNA
box (back)
IN