Tabla de contenido
Idiomas disponibles
Idiomas disponibles
IMPORTANT
When cutting, be sure to adjust the blade extension according to the material that will be cut. If too much
of the blade is extended, the blade may break or the mat may be cut.
Do not use a broken blade. Otherwise, cutting cannot be performed correctly. If the blade breaks,
remove the broken piece of blade from the cut material. When removing the broken piece of blade from
the cut material, use tweezers; do not touch it with your fingers.
Do not place the AC adapter, power cord and foreign objects within the range of the mat's movements
(feed area). Otherwise, operations cannot be completed correctly.
Do not place large objects on the mat.
Do not forcefully fold or stretch the mat. If the mat is damaged, it may no longer be possible to cut or
draw.
Do not use a damaged mat.
Make sure that the edges of the mat do not become dirty. Otherwise, the mat type cannot be detected, which
will interfere with the proper operation of the machine. If the edges become dirty, wipe them with a dry cloth.
Use a mat designed specifically for this machine. The machine will not operate correctly if any other mat
is used.
Do not cut hard materials, such as metal sheets, which are incompatible with this machine. Otherwise,
damage to the machine may result.
Avoid using craft paper or fabric covered with decorative layer(s) (that can easily separate), such as lamé
or foil. Otherwise, the separated decorative layer may attach to the roller or CaptureMat function sensor
during operation, resulting in damage to the machine. It may also damage the cutting blade.
While the machine is operating, do not forcefully pull out or push in the mat. Otherwise, the blade or
holder may be damaged.
Do not leave material attached to the mat for a long period of time; otherwise, the adhesive will permeate
the material.
Store the mat at room temperature and in a location not exposed to high temperatures, high humidity or
direct sunlight.
Do not use aerosol sprays near the machine. The spray products may become attached to the machine,
causing damage.
Do not attach adhesive materials to any part of the mat outside of the attaching area (grid) or to the back
side of the mat. Otherwise, adhesive will become attached to the rollers, causing damage.
When attaching material to the mat, do not allow it to extend from the attaching area. Otherwise, the mat
may not be fed correctly.
If the carriage must be moved by hand in an emergency, move it slowly. Otherwise, damage to the
machine may result.
Before replacing the holder, check that the holder is not moving.
Do not insert foreign objects into the DC power jack or USB port on the machine. Be sure to make space
available around them.
Do not place any objects on the operation panel. Otherwise, buttons may be accidentally pressed,
causing the machine to operate accidentally.
Do not oil the machine. Otherwise, damage to the machine may result.
Do not use organic solvents, such as thinner, benzene or alcohol, to clean the machine. Otherwise, the finish
may peel off or other damage to the machine may result. Clean the machine by wiping it with a soft, dry cloth.
Do not peel off any labels (for example, the serial number label) affixed to the machine.
6
Tabla de contenido
