ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves,or other apparatus
(including amplifiers) that produce heat.
9. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, liquid has been spilled or
objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
10. WARNING: To reduce the risk of fire or electric shock,
this apparatus should not be exposed to rain or
moisture and objects filled with liquids, such as
vases, should not be placed on this apparatus.
Product Disposal - Certain international, national
and/or local laws and/or regulations may apply
regarding the disposal of this product. For further
detailed information, please contact the retailer
where you purchased this product or the Polk Audio
Importer/Distributor in your country. A listing of
Polk Audio Importer/Distributors can be found on
the Polk Audio website www.polkaudio.com or
by contacting Polk Audio at 5601 Metro Drive,
Baltimore, Maryland 21215, USA— Phone:
+1 410 358-3600.
TAKE INVENTORY
Inside each LCi-RTS105 speaker container,
you should find the following:
1. One LCi-RTS105 speaker
2. Speaker mounting template
3. Paint mask
4. Two grilles (one perforated, one cloth)
5. LCi-RTS105 Manual
6. Registration Card
Important Note: If anything is missing or damaged,
or if your LCi-RTS105 speaker fails to operate, notify
Polk Audio Installer Support Services immediately
at 800-377-7655.
2
Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST,
[email protected]
INSTALLATION RECOMMENDATION
FOR OPTIMUM PERFORMANCE
Important Note: LCi-RTS Series speakers are
for inside installation only. They are not
designed for use outdoors.
You should have a thorough understanding of and
adhere to all local building and fire codes. Also, you
should be familiar with the area behind the wall or
ceiling into which you plan to install your speakers.
Always use wire that meets appropriate building and
fire codes. Use at least 14 gauge wire or heavier for
the best sound quality. (Note: Wiring is best performed
by an experienced professional.)
When installing your LCi Series In-wall Loudspeakers,
be aware of the weight of your particular model (see
specification page for the weight of your model) and
the sturdiness of the material into which you are
installing the speaker. Be aware of any concealed
studs, electrical wiring or plumbing in the wall or
ceiling into which you are installing the speakers.
If you doubt that you possess the necessary skills
or tools, consult your Polk Audio dealer or a
professional installer.
THX
™
PERFORMANCE
For THX
™
performance, use the cloth grille; set the
Tweeter Toggle to the "normal" position and the
Wall Distance Toggle to the greater than 2 feet
(>2) position.
WIRE RECOMMENDATIONS
Runs
Gauge
Lengths up to 25'
18 or 16
Lengths greater than 25'
16 or 14
but less than 50'
Lengths greater than 50'
14 or 12
but less than 75'
Lengths greater than 75'
12
LCi-RTS105 LOUDSPEAKER
INSTALLATION
You will need:
• Pencil for marking the location
of installation.
• Keyhole saw, utility knife or material-
appropriate incising implement for
cutting drywall or other wall material.
• Level.
• Screwdriver, preferably powered,
with Phillips head bit.
• Power drill with appropriate bit
(optional, for starting wall cut).
Trace around
the template.
Cut the hole with
the appropriate tool.