Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1
> Complete install of wall-mounted
toilet bowl.
4
1
> Close angle stop.
> Disconnect the supply line from the
fill valve.
6
70300133_Mounting_Actuator_Plate_A1
2
> Remove the actuator protective
cover using a box-cutter along the
perforated edge that is flush to the
finished wall.
5
2
> Run the supply hose to a bucket.
> Turn on angle stop to flush out line
of debris.
3
1
2
> Press the cover release buttons
at the top inserts to remove the
actuator cover and expose the inner
mechanism.
6
> Turn angle stop off once line is
sufficiently flushed.
Tabla de contenido
