Attaching The Switch To The Wall - Nortel Networks Business Policy Switch 2000 Instrucciones Para La Instalación

Attaching the switch to the
wall
Note: Attach the switch to the wall with the front panel facing up. Any other switch
position compromises safety standards.
b
a = 19.03 in. (48.34 cm)
b = 1.20 in. (3.05 cm)
1 Using the dimensions in this illustration,
drill pilot holes for the mounting screws.
Note: If you are attaching the switch to a hollow wall, use expanding wall anchors.
3
Set the switch in place over the screws.
Tighten the screws to secure the switch to
the wall.
a
9763EA
9765FA
9764FA
2 Insert the mounting screws partway into
the wall.
4
Attach network cables. Use plastic cable
clamps to support the cables and route
them away from fans and vents on the
switch.
Do not let cables hang freely from the port
connectors. The weight of these cables can
damage the connectors.
Business Policy Switch 2000
15
9766FA