GE Tetra PowerStrip DS Guia De Instalacion

Tetra PowerStrip DS
®
LED Lighting System
GEDS71-2, GEDS50-2, GEDS41-2, GEDS32-2,
GEDSH71-3, GEDSH50-3, GEDSH41-3, GEDSH32-3
BEFORE YOU BEGIN
Read these instructions completely and carefully.
EN Install Instruction Guide DE
DA Monteringsvejledning ES
HU Telepítési útmutató LT
RISK OF ELECTRIC SHOCK
∙ Turn power off before inspection, installation or removal.
∙ Properly ground power supply enclosure.
RISK OF FIRE
∙ Use only UL approved wire for input/output connections. Minimum size 18 AWG (0.82mm
∙ Follow all NEC and local codes.
∙ Not to be submerged or used in a marine environment.
RISK OF FIRE OR ELECTRIC SHOCK
∙ LED Retrofit Kit installation requires knowledge of sign electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
∙ Install this kit only in host signs that have been identified in the installation instructions and where the input rating of the retrofit kit does not exceed
the input rating of the sign.
∙ Installation of this LED retrofit kit may involve drilling or punching of holes into the structure of the sign. Check for enclosed wiring and
components to avoid damage to wiring and electrical parts.
∙ Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
RISK INJURY
• While performing installations described, gloves, safety glasses or goggles should be worn.
Prepare Electrical Wiring
Electrical Requirements
• Limited to use in dry and damp locations.
• The grounding and bonding of the LED Driver shall be done in
accordance with National Electric Code (NEC) Article 600.
• Follow all National Electric Codes (NEC) and local codes.
• These products are only suitable for connection to a circuit
from a Class 2 power source.
• These products have not been evaluated for use when
connected to a power source that does not comply with Class 2
voltage and energy limited supplies.
Einbauanleitung FI Asennusohje
Guía de instalación FR Guide d'installation
Montavimo gidas SW Installationshandledning
IT Guida all'installazione
NL Installatiehandleiding
WARNING
)
2
CAUTION
Save These Instructions
Use only in the manner intended by the manufacturer. If
you have any questions, contact the manufacturer.
Installation Guide
SIGN067 | GE2028-2617
NO Monteringsanvisning PT
PL Instrukcja instalacji TR
RETROFIT SIGN CONVERSION LED KIT FOR USE ONLY
IN ACCORDANCE WITH KIT INSTRUCTIONS.
KIT IS COMPLETE ONLY WHEN ALL PARTS REQUIRED
BY THE INSTRUCTIONS ARE PRESENT.
24 24
Volt
Guia de Instalação
Montaj Kılavuzu