Printronix SL4M Guía De Referencia Rápida página 24

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 91
Contact Information
Lithium Battery Warning
1
If you have the optional real-time clock, then the controller board contains a lithium battery sealed inside the
real-time clock chip. Do not disassemble the chip to replace the battery. Do not dispose of the chip by
incineration. Failure to comply may cause the battery to explode. Contact your local waste agency for the
correct disposal procedure.
Printronix makes no representations or warranties of any kind regarding this material, including, but not limited
to, implied warranties of merchantability and fitness for a particular purpose. Printronix shall not be held
responsible for errors contained herein or any omissions from this material or for any damages, whether
direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use
of this material. The information in this manual is subject to change without notice.
This document contains proprietary information protected by copyright. No part of this document may be
reproduced, copied, translated or incorporated in any other material in any form or by any means, whether
manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix.
COPYRIGHT © 2006, 2012 PRINTRONIX, INC. All rights reserved.
Trademark Acknowledgements
Printronix is a registered trademark of Printronix, Inc.
SL4M and T4M are trademarks of Printronix, Inc.
24
Tabla de contenido
loading

Productos relacionados para Printronix SL4M

Este manual también es adecuado para:

T4m rfid

Tabla de contenido