Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Turn off vacuum cleaner° Select a pile height
setting by tilting the cleaner back until front
wheels are lifted slightly off the floor.
Slide the adjustment
lever to the correct
setting.
There are four (4) pile height settings on the
vacuum cleaner. Use the LOW setting for
most bow-pile carpets and bare floor
cleaning (with agitator OFF), and the HIGH
setting for high-pile carpets like shag carpet,
scatter rugs, etc_ Use the other settings as
needed for carpet heights in-between
low
and high pile.
Height
Adjustment
Lever
...............
Do not allow vacuum
cleaner
to
remain
in one spot for any length
of
time when the agitator
is turning.
Damage to carpet
may occur,
Crevice
Too! ._,
Telescoping
Dusting
Combination
-Stre tch
Hose
Hose
Collar
Identify each of the attachments
shown
above°
TO USE ATTACHMENTS
Remove the lower end of the stretch hose
from the vacuum cleaner by grasping the
hose collar, press the release button and
pull straight out. The attachments
can now
be added to the hose.
NOTE: The motor protector may open when
using attachments
or when cleaning new
carpet, due to reduced airflow caused by the
attachments
themselves
or by new carpet
tint filling the bag quickly. See the
TROUBLESHOOTING
section
WARNING
Electrical
Shock And Personal
Injury
Hazard
Disconnect
electrical
supply
before
performing
maintenance
to the uniL
Failure
to do so could
result in elec-
trical shock
or personal
injury
from
vacuum
cleaner
suddenly
starting.
Tabla de contenido
