Taurus AROA PREMIUM Manual Del Usuario página 10

Función selección de temperatura:
- Open the lid (1) by pressing the opening button
(2).
- Fill the appliance (6) with cold drinking water.
- Place the body of the appliance (6) on its base
(7).
- Plug the power cable in to a socket.
- Close the lid (1) of the appliance.
- Press the on/off switch (3) to turn the kettle on.
- The red on light (4) will come on. The display
screen (12) will show "ON".
- Press the programmable button (9). The red
on light (4) will go off and the blue temperature
selection light (11) will come on. The number "50"
will flash on the display screen (12).
- Select the desired temperature by pressing the
+ or - temperature selection buttons.
- You can select any temperature between 50º
and 95ºC, in increments of 5ºC.
- Once you've selected the temperature, the num-
ber indicated will flash for a few seconds and then
be memorised. The number shown on the screen
indicates the current temperature of the water.
- The kettle may be turned off manually at any
time using the on/off switch (3). The appliance will
beep after 12 seconds of boiling.
- When the water reaches the selected tempera-
ture, it will be kept at this temperature for 2 hours.
The kettle will switch itself on and off automatica-
lly as necessary to maintain the desired tempe-
rature.
- After maintaining the temperature for two hours,
if the kettle has not been used it will go into
standby mode.
Cleaning
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Neither parts of this appliance are suitable for
cleaning in the dishwasher.
How to deal with lime scale incrustations:
- For the appliance to work correctly it should be
kept free of limescale or magnesium incrustations
caused by the use of hard water.
Manual Aroa Premium.indb 10
- To prevent this kind of problem, we recommend
the use of water with low lime or magnesium
mineralisation.
- However, if it is not possible to use the kind of
water recommended above, you should periodi-
cally remove the limescale from the appliance:
- Every 6 weeks if the water is "very hard".
- Every 12 weeks if the water is "hard".
- A specific anti-lime scale product should be used
on this kind of product.
- Homemade solutions are not recommended in
the decaling of this appliance, such as the use of
vinegar
Anomalies and repair
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
- In case of breakdown call the customer service
telephone number indicated in the guarantee
sheet. Do not attempt to disassemble or repair
the appliance yourself as this may be dangerous.
For EU product versions and/or in case that it is
requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU on
Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain
hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on
the ecodesign requirements for energy-related
products.
17/6/16 10:04