Cooper LUMARK Crosstour XTOR MAXX Nstrucciones De Instalacion

Cooper LUMARK Crosstour XTOR MAXX Nstrucciones De Instalacion

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

IB514009EN
Installation Instructions - Crosstour Escutcheon Plates
Instructions D'installation - Crosstour Écussons
Instrucciones De Instalación - Crosstour Placas Escudo
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance.
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance. Risk of fire/electric
shock. If not qualified, consult an electrician.
WARNING
Risk of Electric Shock—Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Burn—Disconnect power and allow fixture to
cool before servicing.
IMPORTANT: Read before installing fixture. Retain for future reference.
SAFETY: This fixture must be wired in accordance with the National Electrical Code and applicable local codes and
ordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure under
installation section.
WARNING
Risk of Personal Injury—Fixture may become damaged
and/or unstable if not installed properly.
WARNING
DO NOT mount luminaire within 6" of a combustible
surface. DO NOT handle luminaire by the glass.
N
ote:
These instructions do not claim to cover all
details or variations in the equipment, procedure,
or process described, nor to provide directions
for meeting every possible contingency during
installation, operation or maintenance. When
additional information is desired to satisfy a
problem not covered sufficiently for user's purpose,
please contact your nearest representative.
N
ote:
Specifications and dimensions subject to change
without notice.
Brand Logo
reversed out of
black
INS #
INS #
loading

Resumen de contenidos para Cooper LUMARK Crosstour XTOR MAXX

  • Página 6: Instalación

    Instale las placas del escudo alrededor de la luminaria XTOR. Las placas del escudo de XTOR pueden instalarse en forma vertical (Figura. 3 y 4) u horizontal (Figura 1. y 2). Figura 2. Figura 1. COOPER LIGHTING SOLUTIONS IB514009EN Installation instructions...
  • Página 7 XTOR MAXX según las Figura. 5 y 6. Utilice pernos de anclaje (suministrados por terceros) para conectar las placas del escudo a la pared. Figura 5. Figura 3. 19-1/4” [489mm] 19-1/4” [489mm] Figura 6. Figura 4. COOPER LIGHTING SOLUTIONS IB514009EN Installation instructions...
  • Página 8 Garanties et limitation de responsabilité Veuillez consulter le site www.cooperlighting.com pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.cooperlighting.com para conocer nuestros términos y condiciones. Cooper Lighting Solutions is a registered trademark. Cooper Lighting Solutions All trademarks are property 1121 Highway 74 South of their respective owners.